Audio Technica
Audio Technica AT-VM95SP/H Moving Magnet Cartridge incl. AT-HS6 Headshell - B-Stock
Item-ID: 11227
We will gladly inform you as soon as the article is available again.
I hereby confirm that I have read the Privacy policy.*B-STOCK
Returned product, slight signs of use due to packing and unpacking possible. With full warranty, invoice with VAT from authorised German Audio Technica dealer. The item will be shipped in its original packaging, the outer and/or inner box may show signs of use and/or damage.
VM95 series 78rpm SP cartridge on AT-HS6 Headshell
- AT-VM95SP mounted on AT-HS6BK headshell
- The total set weight is 15.5g
- Assembled and tested in the Audio-Technica Factory in Fukui-Japan
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
Conical Bonded (3mil) Stylus
A conical bonded stylus with a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.
Preassembled With AT-HS6BK Headshell
The AT-VM95SP cartridge is fitted onto the 9g aluminiumdie cast body headshell
| Type | VM Dual Magnet |
| Mounting | Half-inch |
| Frequency Response | 20 - 20,000 Hz |
| Channel Separation | NA |
| Output Channel Balance | 1.5dB |
| Output Voltage | 2.7 mV (mV at 1 kHz, 5 cm/sec) |
| Vertical Tracking Angle | 23° |
| Vertical Tracking Force Range | 4.5 - 5.5g |
| Stylus Shape | Conical |
| Stylus Size | 3.0 mil |
| Stylus Construction | Bonded Round Shank |
| Cantilever | Aluminium Pipe |
| Coil Inductance | 550mH (1 kHz) |
| Static Compliance | 12 x 10-6 cm/dyne |
| Dynamic Compliance | 2.0x10-6cm/dyne (100Hz) |
| Recommended Load Impedance | 47,000 ohms |
| Recommended Load Capacitance | 100-200 pF |
| Weight | 15.5g |
| Dimensions | H21.2×W21.4×D62,4mm |
| Replacement Stylus | AT-VMN95SP |
*required
Other customers also bought