Audio Technica AT-VM95SH Moving Magnet Cartridge

Also compatible replacement styli: AT-VMN95C, AT-VMN95E, AT-VMN95EN, AT-VMN95ML, AT-VMN95SH and AT-VMN95SP

Item number
9541
Manufacturer
Audio Technica

€198,00 189,00

incl. VAT. excl. shipping


On Stock


AT-VM95SH

VM95 series Shibata stereo cartridge

The AT-VM95SH, features a Nude Shibata stylus, one of the most acclaimed stylus format by high end audiophiles. The Shibata stylus produces mid and bass sounds strong and rich in addition to offer a frequency response up to 25,000 Hz.

VM95 Series - Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

 

No use of nuts

VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Shibata Stylus

Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume.

Type VM Dual Magnet
Mounting Half-inch
Frequency Response 20 - 25,000 Hz
Channel Separation 23 dB at 1kHz
Output Channel Balance 1.5dB
Output Voltage 3.5 mV (mV at 1 kHz, 5 cm/sec)
Vertical Tracking Angle 23°
Vertical Tracking Force Range 1.8 - 2.2g
Stylus Shape Shibata
Stylus Size 2.7 x 0.26 mil
Stylus Construction Nude Square Shank
Cantilever Aluminium Pipe
Coil Inductance 550mH (1 kHz)
Static Compliance 20 x 10-6 cm/dyne
Dynamic Compliance 10.0x10-6cm/dyne (100Hz)
Recommended Load Impedance 47,000 ohms
Recommended Load Capacitance 100-200 pF
Weight 6.1g
Dimensions H17.2×W18.9×D28,3mm
Replacement Stylus AT-VMN95SH
Accessories Included Cartridge installation slotted screws 11.0 mm (0.43”) × 2 and
8.0 mm (0.31”) × 2, Washer × 2, Non-magnetic scredriver x 1
– No feedback has been given for Audio Technica AT-VM95SH Moving Magnet Cartridge. –
Rate item
5
1
2
3
4
5
Name Comment Security code Captchar Image
Up