Musical Fidelity

Musical Fidelity M6X ViNYL Audiophile Phono Vorverstärker silber

Artikel-ID: 10250

* inkl. MwSt. zzgl. Versandkosten außerhalb von Deutschland

M6x Vinyl - Phono Stage

The M6x ViNYL is a very high performance, highly accurate phono MM/MC cartridge amplifier in a beautifully designed and executed casework. We set out to make a phono stage without any practical limits. It’s designed in such a way to ensure you cannot overload the input stage or encounter any practical limitations in the output driving capacity during regular use, whether running single-ended or balanced. It has three inputs, and each can be individually set for either MM/ MC and loading. Each input also then remembers its own settings. It offers state-of-the art technical and sonic performance at a very competitive price and is the epitome of the true spirit of high-end audio.

Design Philosophy

While updating from the M6 ViNYL to the M6x ViNYL, we have switched to an entirely discrete circuitry, which results in better technical measurements and better sound. It is equipped with one balanced input and output as well as two single-ended inputs and one single-ended output to fit well into any vinyl hi-fi system. But the important question is: what is so special about discrete circuits

The Advantage of Discrete Circuits

A discrete circuit is composed of electronic components which are disparate, individual devices, also called discrete components. These can be “passive” components, like resistors, capacitors and inductors, as well as “active” components, which in our case are transistors. The opposite to this would be an integrated circuit, which uses operational amplifiers (Op-Amps) in the signal chain. In our industry we employ specialised Op-Amps built for audio applications, which allow us to produce very small and efficient electronics, as well as saving the time of design engineers. However, countless hours of listening tests and years of experience have shown us that even the very best Op-Amps do not tend to be so neutral, natural, dynamic or vivid – all of which are characteristics of the Musical Fidelity “sound”. For that reason, we’re rediscovering our passion for traditional, discrete designs. Where standard phono pre-amplifiers with integrated circuits have a few tens or hundreds of components, discrete designs will employ hundreds or thousands of components by comparison. That makes for an extended design process, but in our opinion results in the best sound for your money. The unit features three separate, independently selectable cartridge inputs. This allows choice between three different turntables, or multiple tone arm configurations if required. Selectable gain is provided to allow for different cartridge sensitivities and ton suit any equipment. Cartridge type and loading is selected by front selector buttons for optimum cartridge performance.

Making Way For Pure Music

The true point of any electronic, actually any audio component, is that you don‘t know it is there. You completely forget its existance. By that criteria the M6x Vinyl is almost perfect. It has no practical audible noise, it doesn‘t really have distortion, you cannot overload its input or output, you can load your cartridge perfectly. It exists to serve the music. To bring the artists intent, emotions and passion to your ears and heart.

The M6 Vinyl In Brief

  • Exact and precise loading for MM and MC cartridges
  • Balanced input & output
  • Fully discrete circuit board design

M6X-Vinyl - Spezifikationen

MM Eingang

  • Frequenzgang: RIAA oder RIAA/IEC (auswählbar) ±0 .2dB
  • Eingangsempfindlichkeit: 5mV In bei 500mV Out (bei 1 kHz)
  • Eingangswiderstand: 47KΩ
  • Eingangskapazität: 50-400pF auswählbar
  • THD at 1 kHz: <0.005%
  • Übersteuerungsreserve: 26dB
  • Signal to noise ratio: >80dB „A“-wtd (40dB,5mV)

MC Eingang

  • Frequenzgang: RIAA oder RIAA/IEC (auswählbar) ±0.25dB
  • Eingangsempfindlichkeit: 500μV In bei 500mV Out (bei 1 kHz)
  • Eingangswiderstand: 25Ω bis 1,2KΩ auswählbar
  • Eingangskapazität: 470pF fix
  • THD at 1 kHz: <0 .02%
  • Übersteuerungsreserve: 26dB
  • Signal to noise ratio: >60dB „A“-wtd (60dB, 1mV)

Ausgänge (RCA/XLR)

  • 1 Paar RCA/Cinch: Links und rechts 500mV nom 10V max
  • 1 Paar XLR (balanced): Links und rechts 1V nom 20V max 

Strom

  • Stromversorgung: 230V/115V intern eingestellt oder 100V optional. AC 50/60Hz 
  • Stromverbrauch:  20 Watt maximum. <0.5 Watt im Stand-by (orangene LED ein)

Maße und Gewicht

  • Nur Gerät, ausgepackt: 5.5 kg
  • Inkl. Versandkarton & Zubehör: 11 kg
  • B x H(inkl. Füße) x T(inkl. Buchsen): 440 x 100 x 385mm

Standard Zubehör

  • Stromkabel: 10 Amp IEC

 

*required

Andere kauften auch

Kundenrezensionen


Rezensionen werden geladen...